SIXTOL SX - Before Use; Lifting; Decreasing

Before Use
Using the jack lever, tighten the release valve (1) clockwise.
Place the jack under the vehicle at the appropriate lifting
location (see Vehicle Operation Instructions).
Insert the jack lever into the shoulder and move it up and
down to raise the vehicle to the desired height.
1.
2.
3.
Lifting
Open the release valve (1), insert the lever (2) into the bracket
(3) and make about 5 full up and down movements to fill the
hydraulic oil with the jack.
Decreasing
EN
8
Remove the lever from the shoulder and loosen the release
valve (loosen slowly by turning counterclockwise).
Do not open the release valve more than one turn.
When the vehicle is fully lowered, extend the jack.
Attention! Lower the vehicle slowly! Turn the release valve
slowly!
1.
2.
3.