EU Declaration of Conformity
Manufacturer and Distributor: TorriaCars s.r.o., Nádražní 12, Žandov,
471 07, www.torriacars.cz, E-Mail: info@torriacars.cz,
ID: 28723163, VAT ID: CZ28723163
declares that, as a result of its design and construction, the subsequently marked
equipment complies with the relevant European Union safety requirements. This
declaration is no longer valid in the event of equipment modifications not approved
by us. This declaration is issued under the sole responsibility of the manufacturer.
Description and identification of the equipment:
SIXTOL SX3007
Hydraulic jack 2,5t - SX JACK 2,5t
has been designed and manufactured in accordance with the following standards:
EN ISO 12100:2010, EN 1494:2000+A1:2008
and harmonization regulations:
2006/42/EC
CE mark - 93/68/EHS
and complies with CE certificate:
No. 0B181227.JIICD49 ze dne 27.12.2018
Completion of the technical documentation was carried out by Adam Jágr based at
the manufacturer's address. Technical documentation is available at the
manufacturer's address.
Place and date of issue of EU declaration of conformity:
TorriaCars s.r.o., Nádražní 12, Žandov, 471 07, Czech Republic 6.6.2023
Person authorized to draw up the EU declaration of conformity on behalf of the
manufacturer (Name, Function, Singnature):
Adam Jágr – Managing Director
EN
12
To Next Page
Loading...
