Using a Sizzlits Die and Sizzlits Decorative Strip Dies
Place Sizzlits die onto a Cutting Pad with foam side up. Place
paper over the die. Place another Cutting Pad over the paper to
create a “sandwich.”
Place “sandwich” on Big Shot Plus Platform with the Adapter Pad B
and slide into opening of Big Shot Plus. Note the rotation of the
handle and continue to rotate it in the same direction until the
Platform has passed through the opening and the rollers. Remove
Platform from Big Shot Plus. Your die-cut shape is ready to use!
“Sandwich”
To Next Page
Loading...
