Using Movers & Shapers™ Dies
Place a Movers & Shapers die on a Movers & Shapers Shuttle.
Place desired material to be cut on top of the die. Place a
Cutting Pad on top of the material to create a “sandwich.”
Slide the sandwich into the opening of the Big Shot. Note
the rotation of the handle and continue to rotate it in the
same direction until the sandwich has passed through the
opening of the rollers. Remove the sandwich from Big
Shot. Your die-cut shape is ready to use!
“Sandwich”
Standard Cutting Pad
Material
Metal Surface
NOT FOR CUTTING
Die (foam side up,
magnet side down)
Movers & Shapers
Magnetic Dies
Movers &
Shapers Shuttle
Place sandwich on Extended Platform and slide Platform
into opening of Big Shot. Note the rotation of the handle
and continue to rotate it in the same direction until the
Platform has passed through the opening and the rollers.
Remove Platform from Big Shot. Your die-cut shape is
ready to use!
Place material to be die-cut on Precision Base Plate. Place
die over material or photo and align. Place a Cutting Pad
over the die and material to create a “sandwich.”
Using Framelits
™
or Wafer-Thin Dies
Cutting
Pad
Framelits or
Wafer-Thin Die
Single Sheet of:
Lambskin, Cardstock, Felt, Fabric
“Sandwich”
Extended Thin
Die Adapter
Extended Platform
Extended Thin Die Adapter
& Platform
Precision Base
Plate
The Sizzix
®
Big Shot
™
Jewelry Studio Machine is exactly what makers
have been looking for – a versatile, easy to use and affordable
multipurpose creative system. It is designed to cut and emboss for
creating unlimited fun projects. Using Sizzix Originals
™
, Bigz
™
, Movers
& Shapers
™
, Embosslits
™
and Framelits
™
dies, as well as Textured
Impressions
™
, Texture Trades
™
and Texture Fades
™
Embossing Folders,
makers can now express their creativity in minutes. Start unleashing
the limitless possibilities of your Big Shot to create a combination of
dazzling designs.
Assembly Instructions
Before attaching handle, remove protective cap on crank shaft and
discard. Then attach handle by sliding washer over hex screw and
inserting through handle and into crank shaft. Tighten hex screw with
hex wrench provided with handle kit. Press end plug over hex screw
until firmly sealed.
Notices
US & Intl Patents (see sizzix.com/legal)
For customer support, please visit Sizzix.com
866-742-4447 toll-free in USA
949-598-5897 outside USA
For European customer support, please visit www.sizzix.co.uk
within UK: 0844 499 8181
outside UK: +44 (0) 845 345 2277
Made in China
Protective Cap
Hex Screw
Crank Shaft
Washer
End Plug
Handle
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using this product, basic precautions should always
be followed, including the following:
a) Read all the instructions before using the appliance.
b) To reduce the risk of injury, close supervision is
necessary when this machine is used near children.
c) Do not contact moving parts.
d) Only use attachments recommended or sold by the
manufacturer.
e) Do not use outdoors.
f) Always place and operate this machine on a clean, flat
surface.
g)
PINCH HAZARD. AVOID ROLLERS.
h)
DO NOT OVERLOAD THE MACHINE.
i)
CUTTING HAZARD. AVOID CONTACT WITH THE
DIE BLADE.
j)
ADULT SUPERVISION OF CHILDREN RECOMMENDED.
Warranty
™
This product comes with a limited warranty. Visit
Sizzix.com/warranties for details.
Crank Shaft
Washer
Hex Screw
End Plug
Handle
Protective Cap
Jewelry Studio • Espace bijoux
• Estudio de Joyería
PAGE 1
To Next Page
Need help?
General
