Operating Instructions
1. Inserting Micro SD Card
Note: Please choose branded Micro SD card and format it on computer before use. Neutral cards are not guaranteed to work normally.
2. Installing and removing batteries
A Press on battery cap to open it.
B Correctly install battery into camera as indicated by +/- symbols and direction of arrows marked on battery until it’s in place.
C Battery Gauge: Please refer to diagram.
D Remove Battery: Open cap to take battery out.
3. Charging
A Charging can be done by either connecting M10+ to computer or power adaptor.
B Charge M10+ o n vehicle by connecting it to car charger.
C
M10 can record video while charging (Switch into Vehicle-mounted Mode in “Menu”）
Charging of M10+ can be done even when it’s powered off.
4. Vehicle mounted video record
A Firstly set up menu, and search vehicle- mounted mode in the menu, then power on(it will automatically and circularly
record video)
B Plug in vehicle-mounted charger, and power on the vehicle, and the machine will automatically start. switch off, the
machine will automatically power off.
5. Switching camera on and off
A Press and hold power switch for 3 to 5 seconds to turn it on / off.
B Switch it on and off by turning display screen on and off.
6. Mode Switching
Switch between video recording / photo shooting / playback / menu by pressing “Power On-Off” button.
recording mode, while photo shooting mode. Symbols are displayed on top of screen. Refers to the function of
video playback.
7. How to record videos and configure recording setting
1 Video Recording
To Next Page
Loading...
