22
Additional Features
Child function
You must be sitting on the seat to press the [CHILD/MASSAGE] button (for 1 second).
•
With the child function, the nozzle comes out as long as possible, and the water pressure,
water temperature, drying temperature are set to be suitable for children.
•
After cleansing, the [DRY] function will automatically operate for 1 minute.
•
The child function works even if the seat sensor does not detect the user.
Massage
Press the [
CHILD/
MASSAGE] button (3 seconds or more).
•
The rear nozzle operates in the massage function.
•
The cleansing water is sprayed as the rear nozzle moves back and forth.
•
It is recommended not to exceed 10 time cleansing consecutively to prevent malfunction.
ECO Mode
Press the [ECO] button.
•
When not in use, Seat/Water temperature is forcibly set low to reduce electricity usage.
•
When the button is pressed, the power saving indicator lamp will light up.
•
When a user is detected or a button is pressed, power saving is temporarily turned off.
If after 5 minutes, no user is detected, it automatically switches to power saving mode.
•
The [ECO] mode allows you to feel the difference in seat temperature because the seat
temperature setting temperature (68˚F~75.2˚F / 20˚C~24˚C) is different for each time period in
power-saving mode.
Toilet Bowl Sterilization
Press the [TOILET STERILIZER] button.
•
The sterilized water made by the electrolysis system is sprayed on the inside of the toilet bowl
to sterilize it.
NOTE
•
If a user is detected during sterilization, the sterilization process will stop.
•
For effective sterilization, cleansing water is sprayed for 10 seconds. Then after 30 seconds,
sterilized water is sprayed again for 10 seconds.
•
During toilet bowl sterilization, close the seat cover. Sterilized water may splash and get on
the toilet seat, but it is harmless to the human body.
(rev00) BID-S24D_User_EN+MES.indb 22(rev00) BID-S24D_User_EN+MES.indb 22 2021-06-07 �� 2:07:452021-06-07 �� 2:07:45
To Next Page
Loading...