SK A1 - Setup Sequence; Device Connection; Start One-Time Setup Procedure

2
Setup Sequence
To properly set up your devices, follow the next steps.
Step 1: Device connection
Connect the device to your computer via USB using the cable included in the package. The cable
has a standard USB plug on one side, and a magnetic interface connection on the other side. If
you lose or damage the cable, please buy a new one from the web site www.securekey.it. Avoid
metallic dust to be in contact with the magnetic interface, and remove the cable from the
computer when it is not connected to the SecureKey devices.
If the operative system asks you to configure the “new keyboard”, please ignore it.
After the connection, the device is ready to be configured and used.
Step 2: Start the one time setup procedure
Open a standard text editor like “notes” or “wordpad” in Windows 10, “Text Edit” in Mac OS or
“nano” in Linux OS. The device will print out some words during this activity.
Follow the sequence:
- open the text editor
- prepare to write on it
- press the next setup sequence on the SecureKey A1 *110011#
SecureKey is a patent pending SMART DEVICES S.R.L. product. www.securekey.it
SMART DEVICES S.R.L. - Via del Cristo 9/a - Bassano del Grappa (VI) - VAT IT04323160244 - info@securekey.it - Capitale sociale 10.000,00 euro i.v.