Need help?Do you have a question about the SKAR Audio SK-M9005D and is the answer not in the manual?
General| Amplifier Class | Class D |
|---|---|
| Channels | 1 |
| RMS Power @ 4 Ohms | 900W |
| Frequency Response | 10Hz - 250Hz |
| Input Sensitivity | 200mV - 6V |
| Crossover Frequency | 50Hz - 250Hz |
| Phase Shift | 0 - 180 Degrees |
| Efficiency | > 85% |
| Power Output (RMS) | 900W |
| Peak Power | 1800W |
| Impedance | 2 Ohm |
| Subsonic Filter | 15Hz - 50Hz |
| Bass Boost | 0 - 18dB |
Details the controls and connections for the SK-M50010 amplifier, including RCA, HI INPUT, and gain settings.
Explains the controls and connections for the SK-M40040 amplifier, covering RCA, HI INPUT, crossover, and mode settings.
Outlines the controls and connections for the SK-M90050 amplifier, including RCA, HI INPUT, crossover, and bass boost.
Details power, remote, ground, and speaker output connections for amplifier setup.
Guides on diagnosing and resolving no sound or output issues, checking connections, fuses, and speakers.
Explains common protection triggers like overload, overheat, short, and voltage, and their solutions.
Addresses distortion and noise by checking input levels, speaker quality, and grounding connections.
Provides guidance on troubleshooting poor bass response, focusing on speaker cables and polarity.
To Next Page
