Need help?Do you have a question about the Skar RP-1500.1D and is the answer not in the manual?
General| Amplifier Class | D |
|---|---|
| Channels | 1 |
| RMS Power @ 1 Ohm | 1500 Watts |
| Peak Power | 3000 Watts |
| Input Sensitivity | 6V - 0.2V |
| Subsonic Filter | 10 Hz - 50 Hz |
| Bass Boost | 0 - 12 dB |
| Signal to Noise Ratio | 90 dB |
| Total Harmonic Distortion (THD) | 0.1% |
| Low Pass Filter | 250 Hz |
| Input Voltage | 12V |
| Efficiency | 85% |
Explains how to connect the power terminals to the amplifier for safe operation.
Illustrates how to connect the audio source to the digital monoblock amplifier inputs.
Shows how to connect speakers to the digital monoblock amplifiers.
Provides steps to diagnose and resolve situations where the amplifier produces no sound.
Explains common causes for amplifier protection mode and how to fix them.
To Next Page
