3. If the machine shutdowns suddenly when it is running, press the “OFF” button
first and then press the “REVERSE” button. To make the food in the squeezing
screw can up release and then press the “FORWARD” button (Repeated 3 times).
When the machine is in reverse, gently press the lid with your hand(to prevent the
lid loose).
If the machine still not work, disassembling the machine and then wash before
use. Please be sure to cut the food into thin strips like carrots and other hard
materials, otherwise it may cause stuck, and even damage to the product (stuck
and mechanical failure).
Step1: Power off the machine, unplug the power
cord.
Attention: When finished juicing, please press the
button of "REVERS'' for easy to cleaning.
Step2: Catch hopper in one hand and the other
one in the bowl and counterclockwise rotate, then
it can be isolated.
Step3: Catch the juice mouth of the bowl and
counterclockwise rotate then it can be isolated.
Step1-2
Step3
Step4: Take out the squeezing screw, fine strainer.
Step5: Disperse the auger, rotation squeezing screw and fine strainer.
Step4 Step5
10
09
4.Click the “OFF” button and unplug the power after juicing.
Warning：
1) Please drink the juice immediately.
2) Must not apply to crush grain, sugar cane and hard fruit (easily cause motor
stuck and mechanical failure).
Cleaning
1.Wash the disassembled parts with flowing water, if the meshes are blocked up
by dreg, please use the cleaning brush for the cleaning.
Attention：
Please do not use the iron wire brush, abrading or sharp cleaning tool for the
cleaning.
Disassembling Method
Cleaning and Maintenance
To Next Page
Loading...
