FOREWORD
________________
__
The operator manual and the
SSCC
Snowmobiler's Safety Handbook
have
been prepared to acquaint the owner I
operator or passenger
of
a new snow-
mobile with the various vehicle controls,
maintenance and safe operating instruc-
tions.
Each
is
indispensable for
the
proper
use
of
the product, and should
be
kept
with the vehicle at
all
times.
Should
you
have
any questions pertain-
ing to the warranty and its application,
please consult the
"Often
Asked Ques-
tion"
section of this manual, or your
authorized dealer.
This manual
uses
the following symbols.
•
WARNING : Identifies
an
instruc-
tion which, if not followed, could
cause serious personal injuries includ-
ing
possibility
of
death.
,_.CAUTION
: Denotes
an
instruc-
T tion which, if not followed, could
severely damage vehicle components.
0
NOTE : Indicates supplementary
information needed to fully com-
plete
an
instruction.
Although the mere reading
of
such in-
formation does not eliminate the
hazard,
your understanding of the information
will promote its correct use .
•
WARNING
:The
engines
and
the
corresponding components iden-
tified
in
this manual should not
be
uti-
lized
on
product(s) other than those
mentioned
on
the cover page of this
manual.
•
WARNING:
Maintenance
pro-
cedures and tightening torques
must be strictly adhered to, never at-
tempt
repairs unless the appropriate
tools are available.
The information and components I sys-
tem descriptions contained
in
this man-
ual are correct at time
of
publication.
Bombardier Inc. however, maintains a
policy
of
continuous improvement of its
products without imposing upon itself
any obligation to install them
on
prod-
ucts previously manufactured.
Bombardier
Inc.
reserves
the right at
any
time to discontinue or change specifi-
cations, designs, features, models or
equipment without incurring obligation.
The illustrations show the typical con-
struction of the different assemblies
and,
in
all
cases, may not reproduce the full
detail or exact shape of the parts shown,
however, they represent parts which
have the same or a similar function.
Most specifications
are
given
in
both
metric
and
customary units. Where pre-
cise accuracy
is
not required, some con-
versions
are
rounded off for easier
use.
A shop manual
can
be
obtained for com-
plete service, maintenance and repair in-
formation.
,_.CAUTION
: Most components of
T this vehicle are built with parts
dimensioned
in
the metric system.
Most
fasteners are metric and must
not
be
replaced by customary fasten-
ers or vice versa. Mismatched or in-
correct fasteners could cause damage
to the vehicle
or
possible personal in-
jury.
To Next Page
Loading...
Need help?
General
