4
them in the safe
operation of the
charger and
they understand
the associated
dangers (otherwise,
there is a danger of
operating errors and
injuries)
• Supervise children
(this will ensure that
children do not play
with the charger)
• Cleaning and user
maintenance of
the battery charger
shall not be made
by children without
supervision
• Always check that the supply voltage
is the same as the voltage indicated
on the nameplate of the charger
• In case of electrical or mechanical
malfunction, immediately switch o
the tool or unplug charger from power
source
• Only use SKIL battery packs
BR1*21**** / BR1*27**** with this
charger
• Do not touch the contacts in the
charger
• Do not expose tool/charger/battery
to rain
• Do not charge battery in damp or wet
environments
• Do not use charger when damaged
• Do not use charger when cord or plug
is damaged; it must be replaced by
a specially prepared cord available
through the service organization
• Do not use battery when damaged; it
should be replaced immediately
a
Charger 2730
INTRODUCTION
• This charger is intended for charging
SKIL battery packs BR1*21**** /
BR1*27****
• This tool is not intended for
professional use
• Read and save this instruction manual
3
TECHNICAL DATA
1
2
Charging time depending on the
battery capacity (in Ah, indicated on the
nameplate of the battery)
2
SAFETY
SPECIFIC SAFETY
INSTRUCTIONS FOR
CHARGERS
• This charger
can be used by
children aged 8
and above and
by persons who
have physical,
sensory or mental
limitations or a
lack of experience
or knowledge
if a person
responsible
for their safety
supervises them
or has instructed
To Next Page
Loading...
