Skil 9295 User Manual

WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Owner’s Manual
Guide d’utilisation
Manual del propietario
For Customer Service
Pour le service à la clientèle
Servicio al cliente
Angle Grinders
Rectieuse d’angle
Amoladora angulare
1-877-SKIL-999
OR
www.skil.com
Model/ Modelo/ Modèle: 9295

Skil 9295 Specifications

General

Type	Angle Grinder
Corded/Cordless	Corded
No Load Speed	11000 RPM
Disc Diameter	115 mm
Wheel Diameter	115 mm
Length	280 mm
Spindle Thread	5/8-11 in

Summary

GENERAL POWER TOOL SAFETY WARNINGS

Work area safety

Ensure a clean, well-lit work area free from distractions and hazards.

Electrical safety

Follow guidelines for proper grounding, avoiding wet conditions, and cord safety.

Personal safety

Stay alert, use common sense, wear appropriate PPE, and prevent accidental starting.

POWER TOOL-SPECIFIC SAFETY WARNINGS

Common safety for grinding, sanding, wire brushing

Read all tool-specific safety warnings, instructions, and specifications before operation.

Accessory compatibility and ratings

Use only manufacturer-recommended accessories with matching speed and size ratings.

Kickback and related warnings

Understanding and avoiding kickback

Learn what kickback is and how to prevent it through proper grip, body positioning, and technique.

Specific Operation Safety Warnings

Grinding operations safety

Follow specific safety guidelines for using grinding wheels, guards, and flanges.

Sanding operations safety

Adhere to safety precautions when using sanding discs, avoiding oversized ones.

Wire brushing operations safety

Observe safety measures for wire brushes, including awareness of thrown bristles.

ADDITIONAL SAFETY WARNINGS

Tool usage restrictions and hazards

Avoid using the tool for unintended purposes and be aware of chemical hazards in dust.

Maintenance and cleaning precautions

Follow proper procedures for tool maintenance and cleaning, avoiding damaging agents.

SYMBOLS AND SAFETY INDICATORS

Safety alert symbols and signal words

Understand the meaning of DANGER, WARNING, CAUTION, and the safety alert symbol.

Eye protection and general safety symbols

Recognize symbols for eye protection and other general safety instructions.

ELECTRICAL AND MEASUREMENT SYMBOLS

Symbols for electrical units and settings

Learn the meaning of symbols related to voltage, current, speed, and selector settings.

Tool construction and recycling symbols

Identify symbols for tool construction type and battery recycling programs.

ADDITIONAL SYMBOLS

Read manual and wear eye protection symbols

Understand symbols that prompt reading the manual or wearing eye protection.

CERTIFICATION INFORMATION SYMBOLS

Underwriters Laboratories (UL) and CSA listings

Recognize symbols indicating listing or recognition by UL and CSA.

Intertek and NOM Mexican standards

Understand symbols related to Intertek testing and NOM Mexican standards compliance.

FUNCTIONAL DESCRIPTION AND SPECIFICATIONS

Angle Grinders components identification

Identify and understand the function of the main parts of the angle grinder.

Model number and technical specifications

Review the model number, dimensions, thread size, and other key specifications.

Accessory speed and diameter limits

Ensure accessory speed ratings and diameters comply with tool specifications.

ASSEMBLY PROCEDURES

Wheel guard installation and adjustment

Learn how to properly install, adjust, and remove the wheel guard for safety.

Lock nut and backing flange usage

Use the correct lock nut and backing flange that match the spindle thread size.

Side handle installation and use

Install the side handle on either side for better balance and control during operation.

ACCESSORY ASSEMBLY

Disc grinding wheel assembly steps

Follow the procedure for assembling grinding wheels, including the backing flange and lock nut.

Backing pad and sanding disc installation

Learn to install backing pads and sanding discs, ensuring correct speed ratings.

ADDITIONAL ASSEMBLY PROCEDURES

Removing sanding accessories

Steps for safely removing backing pads and sanding discs using the lock nut wrench.

Wire brush and wire wheel installation

Procedures for installing wire brushes and wire wheels, ensuring proper seating.

OPERATING INSTRUCTIONS

Slide On-Off Switch with Lock operation

Understand how to use the switch, including locking it in the ON position.

Safe operation techniques

Follow techniques like holding with both hands and starting the tool before work contact.

GRINDING AND SANDING OPERATIONS

Selecting appropriate grinding wheels

Choose grinding wheels based on safe operating speed, recommended diameter, and material.

Grinding tips for efficiency and safety

Optimize grinding by controlling pressure, angle, and rounding new wheels.

Selecting sanding discs by grit and type

Choose sanding discs based on grit size, open/closed coat, and the material being worked.

SANDING AND WIRE BRUSHING TECHNIQUES

Sanding tips for best results

Apply correct sanding angles, pressure, and strokes for optimal finish.

Wire brush applications and safety

Use wire brushes for cleaning and rust removal, avoiding bouncing and snagging.

BRUSHING PRESSURE GUIDELINES

Correct brushing pressure and contact

Use light pressure with wire tips for effective work and to prevent breakage.

MAINTENANCE AND CLEANING

Tool service and lubrication recommendations

Ensure tool service is performed by authorized personnel and follow lubrication guidelines.

Cleaning precautions and safe agents

Follow safe cleaning practices, use compressed air, and avoid damaging cleaning agents.

ACCESSORIES AND EXTENSION CORDS

Extension cord safety and sizing

Use correctly sized extension cords to ensure safe and efficient power delivery.

TROUBLE SHOOTING GUIDE

Tool start-up issues and solutions

Troubleshoot why the tool may not start by checking power, fuses, and cords.

Tool speed issues and solutions

Address issues with the tool not reaching speed by checking extension cords and voltage.

LIMITED WARRANTY INFORMATION

Warranty coverage and claim process

Understand the warranty period, what is covered, and how to make a claim.

Warranty limitations and exclusions

Be aware of limitations on implied warranties and exclusions for consequential damages.