Need help?Do you have a question about the Skil 9002 and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Disc Diameter | 4-1/2 in |
| Amperage | 6 A |
| Voltage | 120 V |
| No-load speed | 11000 RPM |
| Spindle thread | M14 |
| Weight | 1.8 kg |
Keep work area clean and well lit. Avoid explosive atmospheres. Keep children and bystanders away.
Match plugs to outlets. Avoid body contact with earthed surfaces. Do not expose to rain or wet conditions. Do not abuse the cord.
Stay alert. Use personal protective equipment. Prevent unintentional starting. Do not overreach. Dress properly.
Do not force the power tool. Do not use if switch is faulty. Disconnect from power before adjustments. Store idle tools safely.
Have power tool serviced by qualified person. Handle carbon brushes and cords with care. Avoid damage.
Safety for grinding, sanding, wire brushing, abrasive cutting. Use correct guards and accessories.
Use correct guard, recommended wheels, proper flanges. Do not grind with side of cut-off wheel.
Avoid jamming or excessive pressure. Do not apply pressure on the tool. Do not brake discs with side pressure.
Use recommended sanding paper. Avoid large paper extending beyond the pad to prevent hazards.
Be aware of thrown bristles. Do not overstress wires. Bristles can penetrate skin.
Ensure guard does not interfere with wire wheel/brush. Wire components may expand.
Use detectors for cables/pipes. Contact can cause fire, explosion, or shock. Avoid damage.
Unlock switch if power is interrupted or plug is pulled. Prevents uncontrolled restart.
Use dust extraction for stone work. Use approved vacuum cleaners. Reduces dust danger.
Use protective cover with guide for stone cutting. Avoids jamming and kickback.
Use tool for dry grinding/cutting only. Use supplied flanges. Not for users under 16. Always disconnect plug.
Observe manufacturer instructions for non-SKIL accessories. Do not use reducers/adapters. Avoid blind threaded holes.
Connect via FI circuit breaker with 30 mA triggering current for outdoor use.
Get practical information before first use. Do not work with asbestos. Use detectors for utility lines.
Tool for grinding, cutting, deburring metal/stone. Use only for dry cutting. Use adequate protection guard for cut-off wheels.
Identification of parts like on/off switch, ventilation slots, auxiliary handle, guard, spindle lock button, flanges, and discs.
Details for models 9002 and 9004: Power, frequency, amperage, speed, disc capacity, spindle thread, weight, protection class.
Measured values according to EN 60 745 for sound pressure/power and acceleration. Recommends ear protection.
Vibration emission levels measured per EN 60745 for comparing tools and assessing exposure. Factors affecting exposure.
Protect against vibration by maintaining the tool and accessories, keeping hands warm, and organizing work patterns.
Compliance with regulations for slots in structural walls. Consult engineer/architect before work.
Use discs with speed equal to or higher than tool's no-load speed. Clean spindle. Use spindle lock button.
Use supplied auxiliary handles for better control and safety. Essential for stable grip and handling.
Loosen screw to adjust guard position. Ensure closed side faces operator and prevents sparking.
Observe correct mains voltage. Hold tool by insulated gripping surfaces. Check grinding tools before use.
How to start, lock, and switch off the tool. Be aware of sudden impact. Ensure full speed before contact.
Move tool back and forth with moderate pressure. Angle of 30°-40° for best results. Avoid side grinding.
Do not press, tilt, or oscillate. Work with moderate feed rate. Always rotate opposite to motion direction.
Hold tool firmly with both hands at grip areas. Ensure sparks fly away from body. Provide secure stance.
Keep machine and ventilation slots clean. Disconnect plug before work. Avoid cleaning vents with pointed objects.
SKIL appliances guaranteed against assembly/manufacturing defects. Excludes normal wear, overload, improper handling.
Service for maintenance, repair, spare parts. Information available at www.skil.com. Consultants for product questions.
Recycle raw materials. Sort machine, accessories, packaging for recycling. Do not dispose with household waste.
Guaranteed against assembly/manufacturing defects. Valid for 12 months. Free repair/substitution for proven defects.
Defects from improper use, deficient electrical installations, natural wear, improper storage, climate influence excluded.
Warranty void if product is modified, opened by third parties, or repaired by unauthorized persons.
To Next Page
