To Next PageTo Next Page
Need help?Do you have a question about the Skil 9296 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Voltage | 120V |
| Arbor Size | 5/8 in |
| No Load Speed | 11, 000 RPM |
| Amperage | 7.5 A |
| Wheel Diameter | 4.5 in |
| Spindle Thread | 5/8 inch - 11 |
Provides essential safety rules applicable to all power tools, covering work area, electrical, and personal safety.
Safety guidelines common for grinding, sanding, and wire brushing operations.
Details on kickback, a sudden reaction to a pinched or snagged rotating accessory, and how to avoid it.
Explanation of electrical, safety, and recycling symbols used on the tool.
Meanings of agency listing and compliance marks like UL, CSA, ETL, and NOM.
Identification and description of the main parts of the angle grinder.
Key technical specifications for the model 9296 angle grinder, including dimensions and ratings.
Steps for safely installing and adjusting the wheel guard for various operations.
Instructions for attaching backing pads, sanding discs, and wire brushes.
Detailed steps for correctly mounting grinding wheels onto the spindle.
How to use the paddle switch with its 'Lock-OFF' feature for safe operation.
Techniques and tips for effective grinding, including wheel selection and angle.
Best practices, grit selection, and techniques for various sanding tasks.
Guidance on using wire brushes for cleaning, including brushing pressure.
Procedures for tool maintenance, lubrication, carbon brush checks, and cleaning.
Guidelines for selecting appropriate gauge and length extension cords.
Common problems like tool not starting or not reaching speed, and their solutions.
Details of the limited warranty coverage, duration, and claim procedures for SKIL power tools.
