15
Adjusting the Foot Bevel Angle
To adjust the cutting angle, turn the tool upside
down; loosen the hex screw that secures the
foot by the hexagon wrench. (Fig.9)
Move the foot slightly forward and tilt it to the
required angle (0
o
or 45
o
) using the scale (0°or
45°) that is marked on the base bracket. The
foot has indents at 0
o
and 45
o
(tilt left or right)
for easy angle setting (Fig.10 &Fig.11).
Fig. 9
Fig. 10
45º45º
0º
Fig. 11
To Next Page
