9
GET TO KNOW YOUR EDGER ATTACHMENT
Fig. 1
Blade Guard
Depth Locking
Knob
Guide Plate
Guide Wheel
Sealing Screw
Guide Plate
Blade Nut
Blade Retainer
Debris Flap
Blade
Hex wrench
WARNING
Remove the tool from the package and examine it carefully. Do not discard
the carton or any packaging material until all parts have been examined.
WARNING
If any part of the tool is missing or damaged, do not attach the battery to
use the tool until the part has been repaired or replaced. Failure to heed
this warning could result in serious injury.
SPECIFICATIONS
Blade length 9 In (23 cm)
Edging Depth 3 In (76 mm)
Recommended operating temperature 32 - 104°F (0 - 40°C)
Recommended storage temperature 32 - 104°F (0 - 40°C)
To Next Page