To Next PageTo Next Page
Need help?Do you have a question about the Skil RT1323-00 and is the answer not in the manual?
General| Motor Power | 1.25 HP |
|---|---|
| Voltage | 120 V |
| Base Type | Fixed |
| Collet Size | 1/4 inch |
| Soft Start | Yes |
| Electronic Feedback | Yes |
| LED Lighting | Yes |
| Variable Speed | Yes |
| Amperage | 7.0 Amps |
| Depth Adjustment | Micro-fine depth adjustment |
Ensuring a clean, well-lit workspace to prevent accidents and hazards.
Steps to prevent electric shock, including proper plug use and avoiding wet conditions.
Operator safety, including alertness, PPE, and preventing unintentional starts.
Guidelines for operating tools correctly, avoiding force, and proper storage.
Advice on tool maintenance, keeping parts clean, and seeking professional service.
Instructions for maintaining a firm grip, clamping workpieces, and proper bit installation.
Key safety measures for bit clearance, size limits, and avoiding hazards.
Steps for safely stopping the motor, removing bits, and unplugging the tool after use.
Warnings on climb cutting, bit speed, and the necessity of protective equipment.
Definitions for DANGER, WARNING, CAUTION, and Safety Alert symbols.
Guidance on damage prevention messages and eye protection requirements.
Definitions for technical units, speed indicators, and tool specifications.
Information on symbols indicating battery recycling programs.
Symbols alerting users to read manuals or wear eye protection.
Explanation of various safety and quality certification marks.
Labeling and identification of the router's main parts for user familiarity.
Detailed specifications including power input, speed range, and collet sizes.
Steps for selecting and installing the 1/4-inch collet sleeve and cutter bits.
Step-by-step guide to safely insert and securely tighten cutter bits into the collet.
Instructions for safely removing a cutter bit from the router's collet/nut assembly.
Guidance on inspecting, cleaning, and maintaining the collet/nut for optimal performance.
Tips for keeping cutter bits clean and sharp for improved cutting results.
Procedure for securely attaching the router motor housing to the fixed base.
Instructions for making coarse and fine adjustments to the router's depth of cut.
Details on using the micrometer-fine adjustment for precise depth settings.
Operation of the toggle switch and the benefits of the soft-start feature.
Information on the built-in LED worklights and their operation.
Explanation of the green light indicating power source connection.
Steps for assembling and attaching the edge guide for routing applications.
How to use the speed dial to match router speed to bit size and material.
Chart for selecting optimal router speeds based on bit diameter and material type.
Importance of test cuts and proper placement of the router on the workpiece.
Step-by-step guide for executing edge routing operations with the fixed base.
Detailed instructions for performing internal routing, including plunge and flush techniques.
Guidance for freehand routing of patterns, signs, and relief sculptures.
Using pilot bits to accurately shape workpiece edges.
Principles of feed rate, direction, and preventing kickback during external cuts.
Proper positioning of guides and feed direction for internal routing tasks.
Consequences of rapid feed rates, including poor cut finish and motor stress.
Impact of slow feed rates, such as glazing, burning, and rippled cuts.
Instructions for installing, removing, and maintaining the chip shield for safety.
Guide to attaching the vacuum adapter to the router's vacuum port.
Steps for inspecting and replacing worn carbon brushes to maintain motor performance.
Guidelines for safely cleaning the router, ensuring ventilation openings are clear.
Guide to selecting appropriate extension cords based on tool amperage and length.
Remedies for common router problems like no power or poor cut finish.
Details on warranty period, coverage, exclusions, and how to make a claim.
