16
Recommended Screws for Various Applications
The tool is versatile for use with a variety of
screws.
Driving Materials Screws
Electrical
Outlet
With pre-
mounting holes
Self-Tapping
Screws (≤ST3.5 )
(see FIG.7a)
With threaded
mounting holes
Machine Screws
(≤M6) (see
FIG.7b)
Steel Plate (With threaded
mounting holes)
Machine Screws
(≤M6) (see
FIG.7c)
Soft Wood Self-Tapping
Screws (≤ST3.5)
(see FIG.7d)
For screws other than those listed above, the
screwdriver may be used manually as a non-
powered screwdriver.
DANGER
Never insert any part of the
tool, including the bit, into
an electrical outlet for any reason. Never
touch any portion of the tool to any
potentially live circuit. Failure to obey this
warning could cause electric shock and other
serious personal injury.
Refer to “Detecting AC Circuits in Cords,
Switches, and Outlets”.
Fig. 7a
Pre-mounting Hole
Self-tapping Screw
Electrical Outlet
Fig. 7b
Electrical Outlet
Threaded Mounting Hole
Machine Screw
Fig. 7c
Steel Plate
Threaded Mounting Hole
Machine Screw
Fig. 7d
Soft Wood
Self-tapping Screw
To Next Page
