EasyManua.ls Logo

SKIPIO SFT45-4 - Controller Alarms for users

Default Icon
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power On/Off
Plugging into the power automatically turns on the cabinet. There are several ways manually
power on and off while pugging in.
1. There is a power switch located at the top of the cabinet (near condenser).
Controller Alarms for users
Electric controller When the inside temperature is lower than - 45°C, the panel will display ‘LO’,
and higher than +18°C, ‘HI’ will be displayed.
Defrost starts when the icing on the evaporator occurs: usually 4 ~ 6 times a day.
It will take 20 ~ 30 minutes to finish defrost. The compressor drops the cabinet temperature down
to further 7°C on the current setting temperature.

Related product manuals