SKLZ LAUNCH TEE ELITE

To Next Page

LAUNCH TEE ELITE

GETTING STARTED

1-YEAR LIMITED WARRANTY

This warranty does not cover damages resulting from accidents, misuse, abuse or lost merchandise.

Need proof of purchase for warranty coverage. Questions? Email help@4implus.com or call toll-free 1-800-446-7587.

Made in China. ©2020 Implus Footcare, LLC. Manufactured and distributed by Implus Footcare, LLC: 2001 T.W. Alexander Drive, Box 13925, Durham, NC 27709-3925. SKLZ is a trademark or registered trademark of

Implus Footcare, LLC in the U.S. and/or other countries. Product features, appearance and speciﬁcations may be subject to change without notice. Unauthorized duplication is a violation of applicable local and international laws.

Thank you for choosing the SKLZ Launch Tee Elite. We are dedicated to providing you with the best tools and instruction possible to help you prepare for your sport.

If there is anything else we can do to help, don’t hesitate to send us an email at help@4implus.com or give us a call toll-free 1-800-446-7587.

BEFORE YOU BEGIN:

• Read all instructions carefully before using. Failure to do so may result in injury or damage to the product.

• Always wear a NOCSAE-approved helmet. Face guard recommended.

• Always check for wear and tear before use. If any is found, do not use the product.

• Adult assembly required.

• If you are missing any Launch Tee Elite components, please contact Implus customer service toll-free at 1-800-446-7587.

iWARNING:

• Any alteration of this product or its components will result in a disclaimer of liability.

• Regularly check for wear and tear. Stop using Launch Tee Elite if any part of it breaks. Failure to do so could result in injury.

• When in use, make sure the Launch Tee Elite is set up in a clear area to avoid injury.

• When using the Launch Tee Elite, others should stay clear of the area to reduce the risk of injury.

• When using Launch Tee Elite with a net, position the tee far enough away from the net to allow the batter to swing freely while still being close enough to ensure the

net will capture the hit ball.

iCAUTION:

• Keep away from ﬁre and heat sources.

• Do not leave Launch Tee Elite outdoors for extended periods of time.

• Avoid storing the Launch Tee Elite in extremely hot or cold environments, as this could reduce the life span of the product.

• When in use, make sure the Launch Tee Elite is set up in a clear area to avoid damage to property.

Need help?

Do you have a question about the SKLZ LAUNCH TEE ELITE and is the answer not in the manual?

Summary

Getting Started

Before You Begin

Read all instructions carefully before using. Failure to do so may result in injury or damage to the product.

Warnings

Any alteration of this product or its components will result in a disclaimer of liability. Regularly check for wear and tear.

Cautions

Keep away from fire and heat sources. Do not leave Launch Tee Elite outdoors for extended periods.

1-Year Limited Warranty

Warranty does not cover damages from accidents, misuse, abuse or lost merchandise. Proof of purchase needed.

In the Box

Components Overview

Identifies the Base (A), Tee Shaft (B), and Tee Top (C) included in the product packaging.

Getting Started Steps

Assembly Step 1

Press tee shaft (B) into the base (A) until secure.

Height Adjustment Step 2

Adjust the height of the tee shaft to desired location.

The SKLZ Launch Tee Elite is a training aid designed to help athletes practice their hitting skills, particularly in sports like baseball or softball. It provides a stable and adjustable platform for placing a ball, allowing users to focus on their swing mechanics without the need for a live pitcher. The device is built for durability and ease of use, making it suitable for both individual practice and team training sessions.

Function Description:

The primary function of the SKLZ Launch Tee Elite is to hold a ball at a consistent and adjustable height, simulating various pitch locations for batting practice. This allows users to repeatedly practice their swing, develop muscle memory, and refine their hitting technique. By eliminating the variable of a moving ball, the tee helps batters concentrate on their stance, bat path, and follow-through. It is an essential tool for improving hand-eye coordination, power, and accuracy in hitting. The tee's design aims to provide a realistic hitting experience while ensuring stability during powerful swings.

Usage Features:

The SKLZ Launch Tee Elite is designed for straightforward assembly and operation.

Assembly: The device consists of three main components: a base (A), a tee shaft (B), and a tee top (C). To assemble, the tee shaft (B) is pressed firmly into the base (A) until it is secure. The tee top (C) is pre-attached to the tee shaft, simplifying the setup process.
Height Adjustment: A key feature of the Launch Tee Elite is its adjustable height. Once assembled, the tee shaft can be easily adjusted to the desired height, accommodating different users and simulating various pitch zones (e.g., high pitches, low pitches, middle pitches). This versatility allows batters to practice hitting balls at different points in the strike zone, preparing them for a wider range of game situations. The adjustment mechanism is designed to be quick and intuitive, enabling users to change heights efficiently during a practice session.
Stability: The base (A) is engineered to provide a stable foundation for the tee, preventing it from tipping over during powerful swings. This stability is crucial for consistent practice and ensures that the tee remains in place, allowing the batter to focus solely on their swing.
Durability: The components are built to withstand repeated impact from bats and balls, ensuring a long lifespan even with frequent use. The materials chosen are robust, designed to endure the rigors of intense training sessions.
Portability: While not explicitly detailed as a feature, the modular design (base, shaft, top) suggests that the tee can be disassembled for easier transport and storage, making it convenient for moving between practice locations or storing away when not in use.
Safety Guidelines: The manual emphasizes several safety precautions. Users are advised to wear a NOCSAE-approved helmet, with a face guard recommended, to protect against potential injury from errant balls or bats. The tee should always be set up in a clear area, free from obstructions, to prevent injury to the user or others. When using the tee with a net, it's important to position the tee far enough from the net to allow for a full swing while still ensuring the net captures the hit ball. Others should remain clear of the hitting area to reduce the risk of injury.

Maintenance Features:

Proper care and maintenance are essential to ensure the longevity and safe operation of the SKLZ Launch Tee Elite.

Regular Inspection: Users are instructed to regularly check the tee for any signs of wear and tear. This includes inspecting the base, shaft, and tee top for cracks, breaks, or other damage. If any part of the tee breaks or shows significant wear, its use should be discontinued immediately to prevent potential injury. This proactive approach to inspection helps identify issues before they become safety hazards.
Storage: The manual provides specific guidance on storage to protect the product from environmental damage. It advises against leaving the Launch Tee Elite outdoors for extended periods, as exposure to elements like rain, sun, and extreme temperatures can degrade the materials. Similarly, storing the tee in extremely hot or cold environments should be avoided, as such conditions can reduce the product's lifespan. Proper storage in a temperate, protected environment will help maintain the integrity of the materials and components.
Cleaning: While not explicitly detailed, general good practice for sports equipment suggests that the tee should be kept clean. Wiping down the components after use can help remove dirt, dust, or moisture, which can contribute to wear over time.
Avoiding Alterations: The manual explicitly states that any alteration of the product or its components will result in a disclaimer of liability. This emphasizes that the tee is designed to function safely and effectively in its original configuration, and modifications could compromise its structural integrity or performance, potentially leading to injury.
Fire and Heat Sources: Users are cautioned to keep the tee away from fire and heat sources. This is a standard safety measure for many products, indicating that the materials used may be susceptible to damage or pose a fire risk if exposed to high temperatures.
Warranty Information: The product comes with a 1-year limited warranty, covering damages not resulting from accidents, misuse, abuse, or lost merchandise. This warranty encourages users to contact customer service for any issues related to manufacturing defects or product performance, providing a pathway for support and potential replacement if problems arise within the warranty period. This also implies that proper usage and maintenance are expected to ensure the product's durability.