EasyManuals Logo

Skoda 2014 Rapid Spaceback User Manual

Skoda 2014 Rapid Spaceback
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
Lift the variable loading floor in the direction of arrow
1
and move partially
backwards in the direction of arrow
2
.
Lift the variable loading floor at the front, place onto corner
C
and slide in
the direction of arrow
3
until it clicks into place in brackets
B
.
Place the variable loading floor in direction of arrow
4
.
CAUTION
The variable loading floor cannot be set in the upper position when the lug-
gage compartment cover is in the “park position” » page 83.
Note
When in the upper position there is space for storing items underneath the
variable loading floor.
Setting in the lower position
Fig. 86 Set the variable loading floor to the lower position
Read and observe on page 85 first.
The variable loading floor in the upper position can be set to the lower position
as follows.
Grasp the variable loading floor at handle
A
» Fig. 86.
Lift the variable loading floor in the direction of arrow
1
and partially move
in the direction of arrow
2
until it detaches from brackets
B
.
Place the variable loading floor onto the floor covering of the luggage com-
partment while tilted forward.
Push the variable loading floor in the direction of arrow
3
as far as it will go,
and until its front part
C
is raised.
Place the variable loading floor in direction of arrow
4
.
CAUTION
The variable loading floor cannot be set in the lower position when the lug-
gage compartment cover is in the “park position” » page 83.
Removing/inserting
Fig. 87
Remove variable loading floor
Read and observe on page 85 first.
Removing
Grasp the variable loading floor at handle
A
» Fig. 87.
Lift the variable loading floor in the direction of arrow
1
until its rear area is
about 15 cm
B
below the luggage compartment cover » .
Remove the variable loading floor from the vehicle by moving it in the direc-
tion of arrow
2
.
Inserting
Grasp the variable loading floor at handle
A
» Fig. 87.
Insert variable loading floor into the vehicle with the front portion tilted
about 15 cm
B
beneath the luggage compartment cover» .
Then follow the same steps as when setting the upper position » page 85 or
the lower position » page 86 .
86
Using the system

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skoda 2014 Rapid Spaceback and is the answer not in the manual?

Skoda 2014 Rapid Spaceback Specifications

General IconGeneral
BrandSkoda
Model2014 Rapid Spaceback
CategoryAutomobile
LanguageEnglish

Related product manuals