General information2
General information
Equipment overview
Switching on/off: Rotary/push knob for switching the navigation
system on/off (press) and volume control (turn)
Selector key for selecting the corresponding menu:
− – changes over into radio mode and changes the
frequency range when in the radio mode.
− – changes over to the last played media source or selects
a new media source.
− – Phone function – Muting of the current audio source.
− – TIM function (Traffic Information Memory) recorded traffic
announcements can be replayed. After entering up to two
different TIM recording times in SETUP menu, a recording of the
traffic announcements is also possible if the unit is switched off.
− – Switch the traffic information function (Traffic Program) on
or off or interrupt the currently received traffic announcement.
− – enables setting-up the individual fields.
and : The backwards/forwards keys operate the “active” audio
source.
− RADIO-Mode – for the selection of the stations from the memory
list.
− MEDIA-Mode – for the selection of the previous or following
track.
CD-case
Touchscreen (Touch-screen): Fields circled in colour on the display
are presently “active” and are operated by touching the display.
Eject key – press briefly to move an inserted CD into the posi-
tion ready for removal.
– opens the sound and volume settings menu.
Setting up button
− RADIO mode – turn for manual station adjustment; press briefly
to start or stop the automatic play (Scan).
− MEDIA mode – turn to change track; press briefly to start or stop
the automatic play (Scan).
Memory card case: SD memory cards (“Secure Digital Memory
Cards”), SDHC (“Secure Digital High Capacity Card”) and MMC
(“Multimedia Cards”) measuring 32 mm x 24 mm x 2.1 mm and with
a capacity of up to 32 GB are available. The case for the memory card
is located under the display.
Explanation of symbols
* items of equipment which are marked in such a way are only installed as standard
on certain models or are supplied as special equipment.
End of a section.
The section is continued on the next page.
Note
This Owner's Manual describes the range of functions at the time of going to press.
The illustrations can differ in minor details from the version of your unit.
Important information
Warranty
The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, however,
a precondition that the housing has not been damaged and no unauthorised
attempts have been made to carry out repairs.
To Next Page
Loading...
Need help?
General
