EasyManua.ls Logo

Skoda Octavia II 2008 User Manual

Skoda Octavia II 2008
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
Workshop Manual
Octavia II 2004 , Octavia II 2010 ,
Superb II 2008 , Superb II 2011 ,
Yeti 2010 , Yeti 2011
Propshaft and rear final drive
Edition 10.2018
Service
Service Department. Technical Information

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Skoda Octavia II 2008 and is the answer not in the manual?

Skoda Octavia II 2008 Specifications

General IconGeneral
BrandSkoda
ModelOctavia II 2008
CategoryAutomobile
LanguageEnglish

Summary

00 - Technical data

1 Safety instructions

Safety precautions for working on vehicles and during specific operations.

39 - Final drive - rear differential

1.2 Removing and installing propshaft from rear final drive

Step-by-step guide for detaching and refitting the propshaft from the final drive.

1.3 Removing and installing propshaft

Comprehensive procedure for removing and installing the propshaft assembly.

1.4 Repairing propshaft

Procedures for repairing the propshaft, including CV joint and bearing work.

6 Four-wheel drive clutch

Comprehensive information and procedures for the four-wheel drive clutch system.

6.3 Functional test of four-wheel drive clutch

Procedures for performing functional tests on the four-wheel drive clutch.

6.4 Checking oil level in the four-wheel drive clutch

Step-by-step instructions for checking the oil level in the 4WD clutch.

6.5 Drain off and fill oil for four-wheel drive clutch

Procedure for draining and refilling the oil in the four-wheel drive clutch.

6.8 Removing and installing four-wheel drive clutch

General procedures for removing and installing the complete four-wheel drive clutch unit.

6.9 Disassembling and assembling coupling

Steps for disassembling and assembling the coupling part of the 4WD clutch.

2 Final drive

2.2 Removing and installing the rear final drive

Step-by-step guide for removing and installing the complete rear final drive unit.

5 Axle oil in final drive

5.2 Check the oil level in the final drive.

Step-by-step instructions for checking the final drive oil level.

Related product manuals