Need help?Do you have a question about the Skoda Octavia IV 2021 and is the answer not in the manual?
General| Brand | Skoda |
|---|---|
| Model | Octavia IV 2021 |
| Category | Automobile |
| Language | English |
Provides information regarding oil change services, including deadlines and procedures.
Details the inspection of engine components in the engine compartment for leaks and damage, checking lines and connections.
Provides instructions for removing and installing the toothed belt and tension roller.
Outlines the procedure for replacing the toothed belt for the coolant pump drive.
Explains how to check the engine oil level, including oil level limits and measurement procedures.
Details procedures for draining, suctioning, and filling engine oil, with specific instructions for petrol and diesel engines.
Specifies VW engine oil standards and fill quantities for models up to MY 2020 and from MY 2021.
Provides step-by-step instructions for replacing the engine oil filter for petrol and diesel engines.
Explains how to check the cooling system, including antifreeze protection and coolant level.
Details how to check the condition of V-ribbed belts, including inspection points and necessary tools.
Provides detailed steps for replacing spark plugs for various TSI and TDI engine types.
Outlines procedures for replacing air filter elements and cleaning the air filter housing for petrol and diesel engines.
Details the procedure for replacing the fuel filter in diesel engines, including safety warnings.
Covers filling, replacing, and safety precautions for the Reduction agent (AdBlue®) system.
Details how to check final drive and joint boots for leaks and damage.
Provides instructions for changing the oil in the four-wheel drive clutch, including special tools and procedures.
Details the oil change procedure for DSG 0GC gearboxes, including checking and filling the gear oil level.
Explains how to replace ATF for the 6-speed automatic gearbox 09G, including inspecting and filling the ATF level.
Details how to replace ATF for the 8-speed automatic gearbox 09S, including inspecting the ATF level.
Provides instructions for changing gear oil for DSG 0DD gearboxes, including draining and filling procedures.
Details the procedure for changing the oil in the front axle differential lock.
Explains how to inspect the thickness of front and rear brake pads and linings using an inspection pin.
Details how to inspect the brake system for leaks and damage, including checking brake hoses, lines, and connections.
Provides instructions for changing brake fluid, including procedures for slave cylinder and general vehicle steps.
Explains how to inspect the brake fluid level, including delivery inspection and general inspection procedures.
Specifies the tightening torque for steel and light alloy wheel rims.
Instructs on checking the function of various electrical consumers, including lights, horn, and interior lighting.
Details how to connect the diagnostic unit to the vehicle's diagnostic connector.
Explains how to reset the service interval display using the vehicle diagnosis system (VAS).
Explains how to change service interval coding using the vehicle diagnosis system (VAS), noting conditions for fixed and variable intervals.
Provides critical safety warnings and precautions for working on the high-voltage system.
Details critical safety measures and rules of cleanliness for working on natural gas (CNG) systems, emphasizing flammability and pressure.
To Next Page
