Skoda Superb II 2008 User Manual

Workshop Manual
Fabia II 2007 ➤ , Fabia II 2009 ➤ ,
Fabia II 2011 ➤ , Octavia II 2004 ➤ ,
Octavia II 2010 ➤ , Octavia III 2013 ➤ ,
Octavia III 2014 ➤ , Rapid 2011 ➤ ,
Rapid India 2011 ➤ , Rapid NH 2013 ➤ ,
Rapid NH 2014 ➤ , Roomster 2006 ➤ ,
Superb II 2008 ➤ , Yeti 2010 ➤ ,
Yeti 2011 ➤
Gearbox 09G
Edition 07.2014
Service
Service Department. Technical Information
ProCarManuals.com

Skoda Superb II 2008 Specifications

General

Brand	Skoda
Model	Superb II 2008
Category	Automobile
Language	English

Summary

00 - Technical data

1 Identification of the gearbox

Details on identifying the automatic gearbox, including its location and specifications.

2 Information and repair instructions for the automatic gearbox 09G

General information and repair guidelines for the automatic gearbox 09G.

32 - Torque converter

1 Torque converter

Procedures for draining, removing, installing, and checking the torque converter.

37 - Controls, housing

1 Electric and electronic components, fitting locations of the automatic gearbox

Overview of electrical and electronic components and their locations within the automatic gearbox.

2 Repairing shift mechanism

Detailed steps and procedures for repairing the gearshift mechanism.

38 - Gears, control

1 Removing and installing oil pan, oil filter, slide valve body and internal wiring looms

Instructions for removing and installing the oil pan, filter, slide valve body, and wiring looms.

39 - Final drive - differential

1 Replace the flange shaft gasket rings

Procedure for replacing the gasket rings on the flange shaft.