Skoda Superb II 2008 - Draining the Torque Converter; Removing and Installing Gasket Ring for Torque Converter

32 – Torque converter
1 Torque converter
⇒ “1.1 Draining the torque converter”, page 17
⇒ “1.2 Removing and installing gasket ring for torque converter”,
page 17
⇒ “1.3 Checking the torque converter”, page 18
⇒ “1.4 Installing the torque converter”, page 18
1.1 Draining the torque converter
Special tools and workshop equipment required
♦ Old oil collecting and suction equipment , e.g. -V.A.G 1782-
If the ATF has been contaminated or if the gearbox has had a
major repair, the torque converter should be drained as follows:
– Suction off the ATF with the old oil collection and suction de‐
vice -V.A.G 1782- from the torque converter.
1.2 Removing and installing gasket ring for
torque converter
Special tools and workshop equipment required
♦ Ejection lever - MP3-418 (VW 681)-
♦ Thrust piece - T10175-
Note
♦ Coat gasket rings with ATF. Other types of lubricant will cause
the gearbox hydraulic control system to malfunction.
♦ ⇒ “2.2 Repair instructions”, page 13 .
Removing
– Lever out gasket ring with ejection lever - MP3-418 (VW 681)- .
Install
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
1. Torque converter 17
ProCarManuals.com