Skoda Superb II 2012 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
Workshop Manual
Octavia II 2004 ➤ , Octavia II 2010 ➤ ,
Superb II 2008 ➤ , Superb II 2011 ➤ ,
Yeti 2010 ➤ , Yeti 2011 ➤
Propshaft and rear final drive
Edition 10.2018
Service
Service Department. Technical Information

Skoda Superb II 2012 Specifications

General

Brand	Skoda
Model	Superb II 2012
Category	Automobile
Language	English

Summary

00 - Technical data

Safety instructions

Essential safety precautions for working on vehicles, including start-stop systems and road tests.

Repair instructions

General guidelines and rules for performing gearbox repairs and maintenance procedures.

39 - Final drive - rear differential

Propshaft

Covers the components, removal, installation, and repair of the propshaft.

Final drive

Information on the components and procedures for removing and installing the rear final drive unit.

Assembly carrier

Details on the assembly carrier components and the removal/installation of rubber-metal bearings.

Sealing rings

Procedures for replacing sealing rings on the final drive, including left, right, and output flange rings.

Axle oil in final drive

Covers the location of drain/fill plugs and the procedure for checking and topping up final drive oil.

Four-wheel drive clutch

Comprehensive section on the four-wheel drive clutch system, including components and tests.