Skoda Superb II 2008 - Gearshift Mechanism

Remove the shift mechanism together with the selector lever con‐
trol cable from the shift housing
Remove the shift mechanism -A- together with the selector lever
control cable -C- from the shift housing -B- in
-direction of arrow-. To do so, unscrew 4 screws Pos. 5 (fig.
S37-10008) from the shift housing ⇒ Item 5 (page 50) .
2.1.6 Summary of components - Gearshift mechanism (Rapid)
1 - Cover with handle up to
10.2012
❑ As of 11.2012, the se‐
lector handle was
changed, see Pos. 2
❑ ⇒ “2.5 Removing and In‐
stalling the cover for the
shift mechanism”,
page 58
❑ ⇒ “2.6 Removing and in‐
stalling and installing
selector lever handle up
to 10.2012”, page 65
❑ for the emergency re‐
lease only the cover
needs to be unclipped
⇒ “2.14 Emergency re‐
lease of gearshift mech‐
anism out of position P ”,
page 105
❑ the symbol insert and
the circuit board with the
lamp for selector lever
scale illumination -
L101- are integrated in
the cover
2 - Cover with handle as of
11.2012
❑ ⇒ “2.5 Removing and In‐
stalling the cover for the
shift mechanism”,
page 58
❑ ⇒ “2.7 Removing and in‐
stalling selector lever
handle as of 11.2012”,
page 70
❑ for the emergency re‐
lease only the cover
needs to be unclipped
⇒ “2.14 Emergency release of gearshift mechanism out of position P ”, page 105
❑ the symbol insert and the circuit board with the lamp for selector lever scale illumination - L101- are
integrated in the cover
3 - Open warm-type clamp
❑ replace ⇒ Electronic Catalogue of Original Parts
❑ tighten using hose binding claw - V.A.G 1275-
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
2. Repairing shift mechanism 51
ProCarManuals.com