DANGER (Continued)
● Adjust the belt height adjuster to its top position.
● Children should always be secured in the vehicle with an approved and ap-
propriate restraint system according to their size and weight.
Ð
Using a child seat in the rear seats
First read and observe the introductory information and safety warn-
ings on page 66.
ä
When attaching a child seat in the rear seat bench, the position of the front seat
must be adapted such that the child has sufficient space. Consequently, adjust
the front seat to the size of the child seat and the size of the child. Also consider
the correct seated position of the front passenger ⇒ page 44.
Suitable child seats
In the rear passenger seats, universal child seats according to ECE-R 44 group 0,
0 +, 1, 2 or 3 may be installed.
Ð
Fastening a child seat with the seat belt
Fig. 43 Child seat group 0/0+, group 1, group 2, and group 3
First read and observe the introductory information and safety warn-
ings on page 66.
Child seats specified as universal on the orange label may be fastened with the
seat belt in the seats that are marked with a u in the table.
Weight group Front passenger seat
Outer seats in the rear
seat bench
Group 0
up to 10 kg
u u
Group 0+
up to 13 kg
u u
Group 1
9 up to 18 kg
u u
ä
Weight group Front passenger seat
Outer seats in the rear
seat bench
Group 2
15 up to 25 kg
u u
Group 3
22 up to 36 kg
u u
Fastening a child seat with the seat belt
● When mounting in the front passenger seat.
● Read and follow the instructions of the child seat manufacturer.
● Slide the seat all the way back ⇒ page 44.
● Place the child seat in the seat according to the instructions of the child seat
manufacturer.
● The belt height adjuster of the seat belt must be in the highest position.
● Apply the safety belt or route it through the child seat according to the in-
structions of the child seat manufacturer.
£
69Sitting properly and safely
Vehicle overview Before driving When driving Maintenance, cleaning, servic-
ing
Do-it-yourself
To Next Page
