Skoda Yeti 2016 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
Workshop Manual
Octavia II 2004 ➤ , Octavia II 2010 ➤ ,
Superb II 2008 ➤ , Superb II 2011 ➤ ,
Yeti 2010 ➤ , Yeti 2011 ➤
Propshaft and rear final drive
Edition 10.2018
Service
Service Department. Technical Information

Skoda Yeti 2016 Specifications

General

Brand	Skoda
Model	Yeti 2016
Category	Automobile
Language	English

Summary

3 Repair instructions

39 – Final drive - rear differential

1 Propshaft

Procedures and components related to the propeller shaft.

2 Final drive

Procedures and components related to the final drive.

3 Assembly carrier

3.2 Removing and installing rubber-metal bearing

4 Sealing rings

4.1 Replacing left sealing ring

4.2 Replacing right sealing ring

4.3 Replacing gasket ring for output flange of the rear final drive

5 Axle oil in final drive

5.2 Check the oil level in the final drive.

Instructions for checking and maintaining the final drive oil level.

6 Four-wheel drive clutch

6.3 Functional test of four-wheel drive clutch

Procedures for functional testing of the four-wheel drive clutch.

6.4 Checking oil level in the four-wheel drive clutch

Steps to check and maintain the oil level in the four-wheel drive clutch.

6.5 Drain off and fill oil for four-wheel drive clutch

Procedures for draining and refilling the oil in the four-wheel drive clutch.

6.6 removing and installing oil filter

6.7 Removing and installing the pump for four-wheel drive clutch

6.8 Removing and installing four-wheel drive clutch

Detailed steps for removing and installing the four-wheel drive clutch assembly.

6.9 Disassembling and assembling coupling

6.10 Removing and installing control unit