Need help?Do you have a question about the SKP Pro Audio VZ-12USB and is the answer not in the manual?
Alerts users to important operating and maintenance instructions and warnings about electrical hazards.
Adjust channel level, gain, and frequency response for optimal sound.
Manage signal levels sent to monitor and effects buses.
Control stereo placement and route signals to specific buses like SUB or Stereo.
Monitor signal levels and potential clipping to prevent distortion.
Select from sixteen available digital effects and adjust their time parameters.
Manage levels for AUX1, Effect Sends, Returns, and Tape In.
Configure SUB/ST/PFL routing and adjust headphone output level.
Monitor output levels and select signal sources for meters and C-R/Phones.
Indicates AC power status and phantom power activation.
Enables +48V phantom power and applies bass/treble enhancement.
Controls main stereo and sub outputs; shows rear panel connector layout.
Details of Line, Insert, Stereo, RCA, MON Send, EFX Send, Control Room, and Headphone connections.
Location of the power switch and summary of technical specifications.
Details about the power adapter input and USB port functionality for recording/playback.
Provides detailed sensitivity ranges and nominal/maximum levels for all inputs and outputs.
Specifies frequency points for EQ and gain adjustment ranges for channels and sends.
General| Type | Analog |
|---|---|
| Channels | 12 |
| USB Interface | Yes |
| EQ Bands | 3-band |
| Aux Sends | 1 |
| Phantom Power | Yes |
| Inputs - Mic Preamps | 4 |
| Inputs - Line | 12 |
| Inputs - Other | 2 x RCA |
| Outputs - Main | 2 x XLR |
| USB | Yes |
| EQ per Channel | 3-Band |
To Next Page
