GERMANY
Charging the +COM/UNIT and your smartphone using your e-bike’s on-board computer
21
Charging the +COM/UNIT and your smartphone
using your e-bike’s on-board computer
If you have an e-bike that uses a USB power supply (5 V/min. 0.5 A) on the on-board computer, you can
charge the +COM/UNIT and your smartphone using the e-bike’s on-board computer while cycling.
Proceed as follows to charge:
➤ Open the connection socket (1) of the e-bike’s on-board computer.
➤ Insert the plug (2) of the COMPIT cable into the connection socket (1) of the e-bike’s on-board computer.
The +COM/UNIT charging process starts straight after the e-bike has been switched on. The orange LEDs
flash one after the other. To charge the smartphone, proceed as described on page 17 onwards.
If the smartphone is docked, it is charged first. The +COM/UNIT is charged once the smartphone is
fully charged
i
To Next Page
Loading...