EasyManuals Logo

sks Basic Line 2012 User Manual

sks Basic Line 2012
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
~ 27 ~
11. Care instructions
Only clean the door station with a soft cloth which has been dampened with mild soap. Dry cloth,
aggressive cleaning agents and scrub cleansers may damage the surface.
12. Technical data
Electrical data
Input voltage a+ / b-
22 25 VDC
Output voltage L / M
3 4 VDC
Output current L / M
Maximum 15 mA
Name plate illumination at LD / M
Maximum 2
General data
Installation height of door station
1.45 to 1.60 m (reference is the camera lens)
Light sensitivity
0.2 lux (color) and 0.05 lux (black/white)
Resolution
PAL, 795H x 596V Pixel, 650 TV-Lines
View angle
Horizontal 100° und Vertical 80°
Temperature
-10 °C to +50 °C
Humidity
20 % to 90 % non-condensing
Housing
Plastic housing
Dimensions of front (width x height x depth)
135 x 190 to 365 x 4 mm (50 mm with in-wall box)
IP Code
IP42
13. Service
For the warranty applies the legal requirements. The exchange of the device in a service issue shall be
made by an electrician.
CE Notes
This is a Class A device.
Disclaimer of liability
We have checked the conted of the printed material to compliance with the described hardware and software. However deviations
may occur, therefore no liability is assumed regarding complete compliance. The information in this publication is reviewed regularly
and necessary corrections are uncluded in the following editions.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the sks Basic Line 2012 and is the answer not in the manual?

sks Basic Line 2012 Specifications

General IconGeneral
Brandsks
ModelBasic Line 2012
CategoryTouch terminals
LanguageEnglish