Need help?Do you have a question about the SKY-WATCHER SynScan EQ3 Pro and is the answer not in the manual?
General| Brand | SKY-WATCHER |
|---|---|
| Model | SynScan EQ3 Pro |
| Category | Racks & Stands |
| Language | English |
Explanation of the three operating modes: Full Feature, Easy Tracking, and Standalone.
Step-by-step guide to initialize the SynScan hand control after mount setup.
Overview of available alignment methods for different telescope mount types.
Process of selecting and centering alignment stars for mount calibration.
Detailed steps for aligning equatorial mounts using various star alignment methods.
How to adjust backlash compensation for improved telescope movement accuracy.
Necessary hardware and software for updating SynScan firmware.
Detailed procedure for updating the SynScan hand control firmware.
Common issues and solutions during the firmware update process.
Saving telescope alignment and PAE data to resume later without recalibration.
Improving pointing accuracy through zone-specific calibration.
Method for polar alignment using star alignment data without a polar scope.
Controlling DSLR cameras for astrophotography batch exposures.
Training and replaying PEC to improve tracking accuracy for astrophotography.
Compensating for cone and non-perpendicular errors in mount alignment.
Coordinating mount and camera for time-lapse astrophotography.
Steps to initialize the hand control with a GPS module for accurate location.
To Next Page
