Need help?Do you have a question about the Sky 325R6 and is the answer not in the manual?
Avoid neckties, scarves, etc., near machine openings to prevent entanglement and injury.
Do not immerse the machine in water or allow liquids to spill on it to prevent electrical shock.
Close supervision is necessary when the appliance is used by or near children for their safety.
Do not open the cover or back of the machine without an authorized service technician.
Ensure the socket-outlet is easily accessible and near the equipment for safe operation.
Steps for turning on the machine and preparing for hot lamination.
Procedure for stopping the lamination process and standby mode.
Instructions for performing cold lamination and when to use it.
Explains how to adjust temperature (0-140°C) and speed (1-9 steps) using control keys.
Details using HOT for hot lamination and MEMO+COLD for cold lamination.
Lists pre-set temperature and speed combinations for the MEMO function.
Describes the functions of MEAS, STOP, and REV buttons for monitoring and roller control.
To Next Page
General
