Need help?Do you have a question about the Sky R6 and is the answer not in the manual?
Detailed technical parameters including width, speed, thickness, and power consumption.
Essential safety guidelines for connecting and using the electrical supply of the laminator.
Addresses issues with the machine not powering on or rollers failing to move.
Solutions for unusual noise during operation and poor lamination quality.
Guidance for when the temperature does not increase or corners are not sealed properly.
Steps to take if the machine enters an emergency state or rollers are out of position.
Information on how to contact customer support for unresolved issues.
Explanation of the control panel layout and the purpose of each button and icon.
Warning against allowing loose clothing or hair near machine openings to prevent entanglement.
Instructions to avoid electrical shock by keeping the machine dry and away from liquids.
Emphasizes close supervision and restricting access to authorized personnel for safety.
Guidelines for accessible socket-outlet placement and safe cord handling during movement.
Recommended temperature and speed settings for laminating films between 75 and 100 microns.
Recommended temperature and speed settings for laminating films between 125 and 150 microns.
Recommended temperature and speed settings for laminating films between 175 and 250 microns.
Advice on adjusting temperature for low-temperature films and avoiding machine damage.
Identification of key parts of the laminator, including display, entry, exit, and power connections.
Instructions for turning on the laminator and initiating the hot lamination process.
Guidance on starting, adjusting speed and temperature, and completing the lamination.
Procedure for safely finishing lamination and entering standby mode to prevent overheating.
Instructions for using the cold lamination function, suitable for heat-sensitive materials.
To Next Page
General
