EasyManuals Logo

Sky R6 User Manual

Sky R6
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
1. The pouch laminator must be connected to a supply voltage
corresponding to the electrical rating of the machine as indicated.
2. Unplug the pouch laminator before moving it, or when it is not in use for
an extended period of time.
3. Do not operate with a damaged supply cord or plug, after it
malfunctions, or after it has been damaged in any manner.
4. Do not overload electrical outlets beyond their capacity as this can
result in fire or electrical shock.
5. Do not alter attachment plug, plug is configured for the appropriate
electrical supply.
6. The unit is intended for indoor use only.
1 Specifications
2 Electrical Safeguards
3 Trouble Shooting Guide
4 After Sales Service Information
Max. Laminating Width 335 mm 490 mm
Max. Laminating Speed 1400 mm 1200 mm
Max. Pouch Thickness 350 MIC
Max. Laminating Thickness 3 mm
Heating System Heating roller internal heater
Q ty of Roller
6
Operating Temp.
0 - 140
Temperature & Speed Control Yes
Preheating Time 6 mins
Power Consumption 1150 watt
Rating 230V / 60Hz / 6A
Dimension 536 x 271 x 112 / 15kg 690 x 271 x 112 / 20kg
Machine has no
power or rollers are
not rolling
Excessive noise
Bad lamination
No increase of Temp
Corner is not sealed
Emergency state
Power code is not
properly plugged in
Power switch off
Operation of gear is not
smooth.
Laminated document
wrinkled, damp, or folded
Check power plug
Document is too thick to
seal the edges of the film
Something may be stuck
Between the heated
rollers or they are out of
position
Check the power plug
is properly plugged
Check the power
switch is turned on
or contact support
Turn off the machine,
and then contact A/S
Adjust the temperature
lower or higher
Check if the power plug
and switch is turned on
or contact support
Use a thinner document
or leave more around
the edges, aprox. 5mm
Turn off the switch
Contact A/S
If you have any problem can not be solved at your end, please contact;
The telephone number is on the label on the back side of machine.
2 3
Problem Cause Solution

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sky R6 and is the answer not in the manual?

Sky R6 Specifications

General IconGeneral
BrandSky
ModelR6
CategoryLaminator
LanguageEnglish

Related product manuals