Hot
Mode
icon
Cooling
Fan
icon
Roller
Operation
icon
Cold
Mode
icon
Curreut
Temperature
icon
POWER
:
For On and Off, Press Power button for 1 second.
HOT
:
Start Hot Lamination.
COLD
:
Start Cold Lamination
TEMP
:
Modify temperature(0~140
C)
SPEED
:
1 ~ 9 Steps
M1, M2
:
Memory function set in production.
MEAS
:
Display actual roller temp.
RUN/STOP
:
Run and stop roller operation
REV
:
Reverse
1. Do not allow neckties, scarves, etc
near front or rear machine openings
as they could get caught by rollers
and be pulled inside, causing
serious personal injury.
2. To prevent possibility of electrical
shock, do not immerse machine in
water or permit liquid to spill inside.
3. Close supervision is necessary
when any appliance is used by
or near children
4. Do not open the cover (or back)
without authorized service-
man.
5. The socket-outlet shall be
installed near the equipment
and shall be easily accessible.
Disconnect the attachment
plug from the receptacle to
which it is connected and keep
the power supply cord in your
possession while moving the
laminator.
4 5
5 Location and Function of Control 6 Trouble Shooting Guide
To Next Page
Loading...
Need help?
General
