EasyManua.ls Logo

Sky Glass LT065-f3-zzz User Manual

Default Icon
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Disassembly Guide
October 5, 2021
0
Disassembly Guide
Sky Glass
27
th
September 2021
Question and Answer IconNeed help?

Do you have a question about the Sky Glass LT065-f3-zzz and is the answer not in the manual?

Sky Glass LT065-f3-zzz Specifications

General IconGeneral
Screen Size65 inches
Resolution3840 x 2160 (4K UHD)
HDMI Ports4
Ethernet PortYes
BluetoothYes
Smart TVYes
Refresh Rate60 Hz
USB Ports2
HDR SupportYes (HDR10, HLG)
Wi-FiYes
Built-in SpeakersYes
Display TechnologyLED
Voice ControlYes

Summary

Sky Glass Safety Precautions

Sky Glass Disassembly Tools

Sky Glass Exploded View

Sky Glass Subassemblies List

Sky Glass Disassembly Steps

Remove Sky Glass Stand

Procedure to remove the stand from the main unit by unscrewing highlighted screws.

Remove Sky Glass Rear Cover

Instructions for removing the rear cover, including unscrewing specific screws and removing spacers.

Disconnect Wires and Identify Boards

Steps to disconnect wires and identify various circuit boards within the device.

Identify Circuit Boards

Identification and labeling of the main circuit boards (A-G) within the device.

Remove IR Board

Steps to remove the IR Board kit, including unplugging wires and releasing fasteners.

Disconnect Internal Wires

Guidance on removing tape and unplugging specific wires connecting components.

Remove Bracket Stand

Procedure to remove the bracket (BKT_Stand) by removing foam and screws.

Remove Mic Board

Steps to detach the Mic Board by removing screws and unplugging its wire.

Remove Key Board

Instructions for removing the Key Board by detaching tape, screws, and wire.

Remove Driver Board

Procedure to remove the Driver Board by unscrewing retaining screws.

Remove WiFi and BT Module

Steps to separate the WIFI and BT Module by removing tape and desoldering connections.

Remove Main Board

Procedure to remove the Main Board by unplugging FFC cables and unscrewing fasteners.

Remove Power Board

Steps to remove the Power Board, including desoldering capacitors.

Panel and T-Con Board Removal

Instructions for removing the T-con board after detaching mylar film, screws, and wires.

WEEE Compliance Information

Related product manuals