USING YOUR SKY
+
REMOTE CONTROL
Your Sky
+
remote control is compatible with your Sky
+
box and with most TV sets. All you have to do is set
up the remote control to work with your particular equipment. Please read this guide carefully to make sure
the setup is done properly and that you are getting the most out of your remote control.
FIRST THINGS FIRST
The remote control runs on 2 AA batteries. To insert or replace the batteries,
follow these steps:
1) Push the catch on the battery cover upwards and pull the dark cover off the
main part.
2) Carefully remove the old batteries (if applicable) then insert the new batteries,
matching the + and - signs.
3) Once the batteries are in, put the cover back on, making sure the catch clicks
into place.
When you’re using the remote control, make sure:
• you point it straight at the Sky
+
box (or TV);
• there’s nothing blocking the infrared receiver on the Sky
+
box (or TV).
To Next Page
Need help?
General
