3. Inserting your viewing card and turning on
Insert your viewing card into your Sky±HD box ensuring the arrows on the card are facing upwards. Switch your TV and Sky±HD box on at the mains.
Bring your TV and Sky±HD box out of standby. Press the button on the top of your box and ensure the green light is illuminated. This can take up to three minutes.
You may need to use your TV remote (not Sky±HD remote) to select the HDMI input on your television. Use the source button
to select the correct input.
Note: It is possible your TV manufacturer labels the source button differently. Please refer to your TV user manual to confirm the correct button.
Once the TV input is set to HDMI you will see Sky Intro Channel 998. If you are receiving the on screen message ‘No satellite signal is being received’, please
refer back to step 2, as your satellite connections may not be connected correctly.
6
To Next Page
Loading...
