skybar Wine System - Page 6

6. Taste a sample of the wine to ensure the
wine is of desired quality.
7. Check the inside of the bottle neck to
ensure no loose pieces of cork or foil will
obstruct the seal between the bottle neck
and the Bottle Pour Assembly.
8. Lift the Bottle Lock Lever into the vertical
(open) position. (See Figure E.)
9. Place the Bottle Tube fully into the bottle.
Ensure the rubber bottle stopper at the top
of the Bottle Tube is fully and firmly
inserted into the bottle.
10. Press the Bottle Lock Lever downward into
the horizontal (closed) position to lock the
Bottle Pour Assembly to the wine bottle.
(See Figure G.)
a. Gently tug upward on the Bottle Pour
Assembly to confirm that it is securely
mounted to the bottle.
11. Securely supporting the bottom of the wine
bottle with your hand, transport the bottle
with the Bottle Pour Assembly to your
One Wine System.
12. Continuing to support the bottle from
the bottom, open the chamber door
and slide the Bottle Pour Assembly into
the unit until you hear it lock into place.
(See Figure C.)
13. Close the Chilling Chamber door.
• The Preserve/Unlock to Pour button light will
blink while you hear the preservation process
begin. The amber light will stop blinking and
will remain lit once the wine has reached the
preservation mode.
11
skybarhome.com
10
Figure F
Figure G
F
ACE THE LABEL
FORWARD.
T
o showcase your
w
ine, turn the bottle so
the label is facing the
front before locking
the Bottle Pour
Assembly in place.
SUGGESTION
INSTALLING
BOTTLES
TASTE WINE
BEFORE SERVING.
Always sample a bit of wine
before loading a new bottle
into the One Wine
System to ensure the bottle
is satisfactory to your tastes.
I
NSPECT
THE BOTTLE.
I
nspect the neck to
ensure it is free of cork
or foil debris before
loading the bottle into
the One
Wine System.
SUGGESTION
SUGGESTION
Figure E
INSTALLING
BOTTLES
• The Chilling Chamber will automatically
begin chilling the wine to the default setting
of 50°F/10°C. To adjust the temperature to
another setting, press and rotate the Control
Knob on the top of the unit to select another
wine varietal setting or a specific
temperature.
• For optimum performance, keep the Chilling
Chamber door closed while in operation.
Note: If the door is left open, the chamber will
automatically shut off after one hour.