Skycruiser TX-650 - User Manual

Questions and Answers

L
Louis PrattAug 6, 2025
What mode to use if Skycruiser Metal Detector doesn't find targets?
- E
  Eric RodriguezAug 6, 2025
  If your Skycruiser Metal Detector is not finding specific targets, ensure that you are using the correct mode for the type of metal you are trying to detect. If you are specifically hunting for coins, using COINS mode is the best choice to eliminate other undesirable targets. Alternatively, you can use the A/M mode, which detects all metal targets to ensure that desired targets are present.
R
Robert RobertsonAug 12, 2025
How to eliminate intermittent signals on Skycruiser Metal Detector?
- M
  Morgan GainesAug 12, 2025
  If your Skycruiser Metal Detector is giving intermittent signals, try scanning from different directions to define the signal. You can also switch to the A/M mode or press the PINPOINT button to precisely locate all targets.
D
debbie80Aug 18, 2025
What to do if Skycruiser TX-650 Metal Detector target metal cursors flash erratically?
- M
  matthew42Aug 18, 2025
  If your Skycruiser Metal Detector's target metal cursors are flashing erratically, it could be due to several reasons. You may have found a trash target, a valuable target that is not parallel to the search coil, or there might be junk targets near the valuable target. To resolve this, scan the area from different directions until the target metal cursor becomes more stable.
R
Ryan HolmesAug 25, 2025
How to fix Skycruiser Metal Detector when it has no power?
- Y
  Yolanda BoydAug 26, 2025
  If your Skycruiser Metal Detector is not powering on, ensure that the batteries are installed correctly. If they are, try replacing all old batteries with new ones.
N
noah27Aug 30, 2025
Why Skycruiser TX-650 makes erratic sounds?
- I
  Isaac GibbsAug 30, 2025
  If your Skycruiser Metal Detector is producing erratic sounds or the target metal cursor is behaving unexpectedly, be aware that excessive amounts of electrical interference may exist if you are using the detector indoors. Also, check if you are near other metal detectors, metal structures, or electrical power lines. You can also try decreasing the sensitivity.

Summary

Preparation

Set-up

Detailed steps for assembling and preparing the metal detector for first-time use.

Quick Start Guide

Device Controls and Display

Overview of the metal detector's buttons, indicators, and display elements for quick operation.

Initial Operation Steps

Steps to power on, select modes, adjust settings, and begin scanning with the metal detector.

Basic Operation

Target Information

Explanation of how the detector displays metal type, conductivity, and depth of detected targets.

Audio Features

Description of the three distinct tones produced by the metal detector based on target conductivity.

Selecting Modes (Discrimination Patterns)

Guide to choosing different detection modes and understanding discrimination patterns for various targets.

Sensitivity

Instructions on adjusting the detector's sensitivity levels to optimize performance in different environments.

Notch Discrimination Pattern

Methods for customizing the detector to ignore specific unwanted metal targets like trash or foil.

PINPOINT

Technique for precisely locating detected metal targets using the PINPOINT mode.

Bench Tests

Procedure for conducting tests to familiarize yourself with the detector's responses to different metals.

Hunting Tips of the Metal Detector

Advice and best practices for effective metal detecting in various conditions.

Battery Replacement

Troubleshooting

Care and Maintenance

Product Disposal

Contact Us

Skycruiser TX-650 Specifications

General

Operating Frequency	6.6 kHz
Battery	9V
Operating Modes	All Metal, Discrimination
Search Coil	10-inch Waterproof DD coil
Detection Depth	Up to 10 inches for coins, up to 3 feet for larger objects
Waterproof	Coil is waterproof, control box is water-resistant

Related product manuals

Skycruiser TX-910

13 pages