Skycut EV24 with SignMaster Pro - User Manual

1
Skycut EV24 with SignMaster Pro
August 25, 2022
• Do NOT read this entire manual… unless you want to. But taking the time to familiarize yourself with the
organization of the manual and the topics covered can assist you in finding the answers you might need.
It’s not practical to print this entire manual because:
• It’s a waste of paper and ink if you only ever need certain sections.
• The live links to videos and web sites in the manual will not work.
• This manual will be updated from time to time.
• You cannot search on individual words. Use Ctrl+F (or command+F on a Mac) to locate all instances of a
particular term.
Also:
• Videos of interest can be found at the following link: Skycut Support Videos
________________________________________________________________
© 2018-2022 Sunrise Electronic Technology Co., Ltd. All Rights Reserved

Summary

Introduction and Setting Up

1.0 Quick Reference for This Chapter

Overview of chapter topics and quick access to sections.

1.2 Safety and Warnings

Critical safety guidelines for operating the Skycut.

1.6 Parts of the Skycut

Identification and description of the physical components of the Skycut.

1.9 Control Panel

Overview of the Skycut's control panel and its functions.

SignMaster Software

2.1 Installing the Software

Step-by-step guide for installing the SignMaster software.

2.2 Connecting the Skycut to Your Computer

Instructions for establishing communication between the Skycut and a computer.

2.3 Test Draw Shapes

Guidance on using the test pen to draw shapes for calibration.

Cutting

3.2 Choices Before Cutting

Factors to consider and options before starting a cut.

3.3 Cut Settings

Explanation of settings like Force, Speed, Blade Offset, Overcut, and Passes.

3.5 Setting the Origin before Cutting

Defining the starting point for cuts on the material.

3.8 Scale Calibration

Procedure to calibrate the cutter's scale for precise sizing.

Troubleshooting FAQs

A1 Communication Issues

Solutions for problems related to powering on and Wi-Fi/USB communication.

A2 Operating Issues

Troubleshooting common operating problems like mat rotation or material feeding.

A3 Cutting;Drawing Issues

Solutions for issues like stray cuts, off-material cuts, or extra lines.

Wireless Stand-Alone Connection

A. Setting Up Wirelessly for the First Time

Guide for initial wireless setup when Skycut has never been connected.

B. Reconnecting to a Wireless Network

Steps to reconnect the Skycut to a previously used wireless network.

Skycut EV24 with SignMaster Pro Specifications

General

Brand	Skycut
Model	EV24 with SignMaster Pro
Category	Plotter
Language	English