Pairing the Beacon to Skydio 2
To fly with the Beacon, you must first pair the Beacon with Skydio 2. Each beacon may only be
paired to a single Skydio 2 at a time. Once a beacon is paired with a drone, it will automatically
connect to that drone every time it is turned on until it is paired with a different Skydio 2.
1. Connect a Skydio battery to Skydio 2; to turn on, press and hold the power button for 5
seconds.
2. Press and hold SKYDIO button for 3 seconds button to turn on beacon.
3. If your Beacon has never paired with a Skydio 2 drone before, the screen will instruct
you to connect the beacon to a vehicle.
To Next Page
Loading...