2: Remote control parameter (T10)
refer to T10
4: Accessories list
Standard configuration:
MX450*1
battery*1
Charger*1
propeller*3 (pair)
T10 remote control*1
remote control strap*1
Typec-otg data cable*1
Micro-otg data cable*1
Five: Basic flight
1: Fully charge the battery before flying.
2: Download the Yunzhuo ground station software on the official website of Yunzhuo Technology
www.skydroid.xin and install it on the mobile phone.
3: Place the aircraft on a flat and open ground with the user facing the tail of the aircraft (the
battery tail is inserted into the aircraft tail).
5: Install the propeller correctly.
(With a propeller rotation direction diagram) Like this:
4: Turn on the remote control (long press the power button), and insert the battery plug into the
power supply port of the aircraft.
5: Wait for the aircraft motor to make a long beep before the self-check succeeds.
6: Open the Yunzhuo Ground Station APP, select Bluetooth to connect to the remote control, and
connect to the data transmission. Insert the USB otg data cable and connect the image.
7: Move the joystick in the inner eight to unlock the aircraft, and slowly push the throttle stick
upward to let the aircraft take off smoothly.
To Next Page
Loading...
Need help?
General
