8: Pull down the throttle stick to lower the aircraft.
9: After landing, pull the throttle stick to the lowest position and hold it for more than 3 seconds
until the motor stops.
10: Turn off the power of the aircraft and the power of the remote controller in turn after
stopping.
Six: Points to note:
1: Fully charge the battery before flying, the aircraft will land if there is no power.
2: Novices should not connect any software to modify the parameters of the aircraft and the
remote controller. Changing the parameters will cause the aircraft to explode or fail to fly, and the
after-sales related maintenance costs need to be returned to the customer (including freight). If
you can't use it, please contact Yunzhuo after-sales service in time.
3: Please do not take off in crowded places, pay attention to the flight mode.
To Previous Page
Loading...
Need help?
General
