SECTION 6, Page 53SJIII Series - The Conventionals 129919
Figure 6.2-7. Scissor Arm Limit Switch Assemblies
Index
No.
Skyjack
Part No.
DescriptionQty.
A 132236 1 SWITCH ASS’Y, High Speed/Pot Hole Limit (All ANSI/CSA except EE Rated)
B 121976 1 SWITCH ASS’Y, High speed limit (For ANSI/CSA EE-Rated models)
C 121978 1 SWITCH ASS’Y, Pothole override limit (For ANSI/CSA EE-Rated models)
D 122014 AR SWITCH ASS’Y, End of stroke limit (Optional)
E 121991 1 SWITCH ASS’Y, Drive cutout limit (Optional)
1 121975 AR • SWITCH, Drilled sealed limit (All except E)
2 119132 1 • KIT, 8-Pole Receptacle, A, B
3 119965 2” • HEATSHRINK. Yellow, A
119964 2” • HEATSHRINK, Blue, D
4a 113018 1 • MARKER, Brady wire #18, A, B
4b 113021 1 • MARKER, Brady wire #21, A, B
4c 113071 1 • MARKER, Brady wire #71, A, C
5a 145963 1 • LABEL, LS1A A, B
5b 145964 1 • LABEL, LS1B A, B
5c 145965 1 • LABEL, LS6 A, C
6 103257 12” • CABLE, 18/3 Cabtire, B
7 119131 1 • KIT, 4-Pole Plug, B
8 122010 1 • SWITCH, Drilled sealed limit, E
9 119130 1 • KIT, 4-Pole receptacle, E
10 119128 1 • KIT, 2-Pole receptacle, C, D
11 121869 AR CLAMP, 2.5” Worm gear
12 118713 1 JUMPER ASS’Y, Drive cutout (Optional)
13 121867 AR BRACKET, Limit switch
14 - - HARDWARE, Mounting
103860 2 • BOLT, Hex Hd 1/4”-20 x 1.75” Gr. 5
103858 2 • BOLT, Hex Hd 1/4”-20 x 1.25” Gr. 5
103980 4 • NUT, Hex 1/4”-20 Gr. B
104000 4 • WASHER, Lock 1/4”
103995 8 • WASHER, Flat 1/4”
15 125953 1 COVER, Limit Switch
104694 4 • WASHER, Flat #10
104185 2 • WASHER, Lock #10
104003 2 • NUT, Hex Machine #10
120094 2 • BOLT, Hex Hd Machine #10-32 x 5/8”
16 121868 AR GUARD, Limit switch
17 100967 AR CAM, Limit switch
18 121908 AR BUSHING, 3/4” Snap-in
19 (Ref.) 1 PIN WELDMENT, Limit switches
(For components, refer to Figure 6.2-3)
AI
To Next Page
Loading...
