Section 2 - List of Tables
SJIII Series
Table 2.6a Operator’s Checklist - ANSI/CSA
N/A P F R N/A P F R
Function Tests
60600AA-ANSI
Labels
Electrical
Limit Switches
Free-wheeling Valve Knob
Hydraulic
Entrance Side
Emergency Main Power Disconnect Switch
Base Control Switches
Date:
Time:
Operator's Name (Printed):
Visual and Daily Maintenance Inspections
OPERATOR'S CHECKLIST
Each item shall be inspected using the the appropriate section of the Skyjack operating manual.
Serial Number:
Model:
Hourmeter Reading:
Operator's Signature:
NNUALLY
BI-ANNUALLY
Platform Control Console
Manuals
Brakes
110V Outlet Receptacle
Ladder
Battery Tray Side
AC Outlet on Platform
Pothole Protection Device
Battery Tray
Battery Charger
Battery
Steer Cylinder Assembly
Wheel/Tire Assembly
Proportional and Main Manifolds
Tilt Sensor
Emergency Lowering Access Rod (If Equipped)
Lanyard Attachment Anchors
Powered Extension Control Console (If Equipped)
Platform Assembly
Hydraulic/Electric Side
Tie Rod (Conventionals)
Greasing Points
Pothole Protection Device
Hydraulic Tank
Hydraulic Oil
Hydraulic Pump and Motor
Electrical Panel
Lifting Mechanism
Test Emergency Main Power Disconnect Switch
Base Control Console
Test Platform Emergency Stop
Maintenance Support
Scissor Assembly
Scissor Bumpers
Rollers
Lift Cylinder(s)
Test Enable Button (If Equipped)
Test Emergency Lowering
Test Platform Raise/Lower Switch
Test Free-wheeling
Test Enable Trigger Switch
Test Steering
Platform Control Console
Test Driving
Test Brakes
Test Platform Raising/Lowering
Test Horn
Test Pothole Sensor
Test Speed Limit
Test Tilt Sensor
Note:
Make a copy of this page or visit the Skyjack web site:
www.skyjack.com for a printable copy.
�
�
�
�
To Next Page
Loading...
